Bendpak HDS-14 14,000 Lbs Standard Length 4-Post Lift (5175170)

Bendpak HDS-14 14,000 Lbs Standard Length 4-Post Lift (5175170) 

BendPak's HDS-14 four-post lift is a whole new breed of rugged. It features superior components that work better, are built to last and increase operator safety. If your service bay needs to get under heavy-duty, oversized vehicles on a daily basis, our 14,000-lb. capacity lift is exactly what you need.

Features:

• 14,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Mid to long-style approach ramps for low ground clearance vehicles
• Runways include rail-kit for optional accessories
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks and sheaves
• Internal anti-sway slider blocks in each column
• Pneumatic push-button safety release
• Features heavy-duty 1/2" aircraft cable
• Safety locks enclosed in columns minimize pinch points
• Oversized sheave diameter reduces cable fatigue
• Oversized self-lubricating cable rollers
• Rugged 1.75" roller axles
• Multi-position safety locks in each column
• Customizable power unit location
• Approach ramps incorporate built-in rear-wheel chocks
• Independent backup slack-cable safety latches
• Runways feature non-skid surface
• Optional drive-thru ramps available
• Optional drip trays available
• Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
• ETL approved 

Specifications: 

Capacity

• Lifting Capacity*: 14,000 lbs. (6,350 kg)
• *Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
• *Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg) 

Rise

• A - Min. Runway Height: 7.625" (194 mm)
• B - Max. Rise: 70" (1,778 mm)
• C - Max. Lifting Height: 77.625" (1,972 mm)
• Time to Full Rise: 60 seconds 

Outside Dimensions

• D - Overall Width: 130" (3,302 mm)
• E - Outside Length: 213" (5,410 mm)
• F - Overall Length: 241" (6,121 mm)
• G - Height of Columns: 93" (2,362 mm)

Inside Dimensions

• H - Width Between Columns: 120" (3,048 mm)
• I - Drive-Thru Clearance: 98" (2,489 mm) 

Runways

• J - Runway Width: 20" (508 mm)
• K - Length of Runways: 199" (5,055 mm)
• L - Width Between Runways: 37.5" (953 mm) or 51" (1,295 mm)
• M - Runway Centerline: 57.5" (1,461 mm) or 71" (1,803 mm)
• N - Outside Edge of Runways: 77.5" (1,969 mm) or 91" (2,311 mm)

Minimum Wheelbase

• Rated Capacity: 140" (3,556 mm)
• 75% Capacity: 120" (3,048 mm)
• 50% Capacity: 100" (2,540 mm)
• 25% Capacity: 80" (2,032 mm) 

Locking

• Locking Positions: 13
• Lock Spacing: Every 4" (102 mm) 

Power Unit

• Motor: 220 VAC / 60 Hz / 1 Ph
• Noise: 45 dB 

Manual

• Download1

Not sure which accessories you need?

• See Car Lift Accessories